Technical data
 -  PVC single cores to
    DIN VDE 0285-525-2-31 /
    DIN EN 50525-2-31 and
    IEC 60227-3
 -  Temperature range
    flexing -5^oC to + 70^oC
    fixed installation -30^oC to + 80^oC
 -  Nominal voltage U₀/U 300/500 V
 -  Test voltage 2000 V
 -  Insulation resistance
    min. 10 MOhm x km
 -  Minimum bending radius
    fixed installation 4x core ᴓ
 -  Radiation resistance
    up to 80x10⁶ cJ/kg
    (up to 80 Mrad)

Cable structure
 -  Bare Cu-conductor, to
    DIN VDE 0295 cl.5, fine-wire,
    BS 6360 cl.5, IEC 60228 cl.5
 -  Core insulation of PVC
    compound type TI1 to
    DIN VDE 0207-363-3 /
    DIN EN 50363-3
    and IEC 60227-3
 -  Core identification see table below

 Properties
 -  Thematerials used in manufacture are
    cadmium-free and contain no silicone
    and free from substances harmful to
    the wetting properties of lacquers

 Note
 -  The following colours are
    recommended :
    black, white, blue, grey, brown, red,
    orange, turquoise, violet and pink.
    Exceptions are the colours green and
    yellow ; these are only
    permitted if the safety regulations
    allows.
    Green is permitted for the identification
    of luminous decorative chains. All
    2-coloured combinations of the
    abovesingle colours are allowed