-  Halogen-free, flexible comtrol
    cable, adapted to
    DIN VDE 0285-525-2-51 /
    DIN EN 50525-2-5-1 and
    DIN VDE 0285-525-3-11 /
    DIN EN 50525-3-11
 - Temperature range
    flexing -15oC to +70oC
    fixed -40oC to +70oC
 -  Nominal voltage 
    U0/U 0.6/1 kV 
 -  Test voltage 4000V
 -  Minimum bending radius
    flexing 15x cable ᴓ
    fixed installation 7.5x cable ᴓ
 -  up to 100x106 cJ / kg (up to 100 Mrad)

Cable structure

 - Bare copper-conductor, to
   DIN VDE 0295 cl.5, fine-wire,
   BS 6360 cl.5, IEC 60228 cl.5
 - Core insulation of halogen-free
   polymer compound type TI6 to
   DIN VDE 0207-363-7 /
   DIN EN 50363-7
 - Core identification to
    DIN VDE 0293-308
   black cores with continuous white
   numbering
 - GN-YE conductor, 3 cores and
   above in the outer layer
 - Core stranded in lyers with optimal
    lay-length
 - Outer sheath of halogen-free
   polymer compound type TM7 to
   DIN VDE 0207-363-8 /
   DIN EN 50363-8
 - Sheath colour black (RAL 9005)
 - with meter marking
 - LS0H = Low Smoke Zero
   Halogen

 Properties 
-  1) For critical applications, we recommend
    The materials used in manufacture are
    cadmium-free and contain no silicone and
    free from substances harmful to the wetting
    properties of lacquers

Tests
 -  Flame test acc. to
    DIN VDE 0482-332-3,
    BS 4066 part 3, DIN EN 60332-3,
    IEC 60332-3 (previously
    DIN VDE 0472 part 804
    test method C)
 -  self-extinguishing and flame retardant
    acc. to DIN VDE 0482 part 267 ,
    DIN EN 60332-1-2 / IEC 60332-1
    (equivalent DIN VDE 0472 part 804
    test method B)
 -  Corrosiveness of combustion gases
    acc. to DIN VDE 0482 part 267 ,
    DIN EN 50267-2-2, IEC 60754-2
    (equivalent DIN VDE 0472 part 813)
 -  Halogen-free acc. to DIN VDE 0482
    Part 267 / DIN EN 50267-2-1 /
    IEC 60751-1 (as per
    DIN VDE 0472, Part 815)
 -  Smoke density acc. ti DIN VDE 0482
    part 1034-1+2, DIN EN 61034-1+2,
    IEC 61034-1+2, BS 7622 part 1+2
    (previously DIN VDE 0472 part 816)

Note
 -  G = with green-yellow conductor
    x = without green-yellow conductor
    (OZ)
 -  AWG sizes are approximate
    equivalent values.
    The actual cross-section is in mm2
 -  screened analogue type :
    JZ-600 HMH-C, confer page 100

 No.cores x
cross-sec.
mm2