Technical data
 - Adapted to DIN VDE 0262
   and DIN VDE 0285-525-2-51 /
   DIN EN 50525-2-51
 - Temperature range
   flexing -15°C to +80°C
   fixed installation -40°C to +80°C
 - Nominal voltage 
    U₀/U 300/500 V
 - Test voltage 
    4000 V
 - Breakdown voltage 
   min. 8000 V
 - Insulation resistance
   min. 20 MOhm x km
 - Minimum bending radius
   flexing 7.5x cable ᴓ
   fixed installation 4x cable ᴓ
 - Radiation resistance
   up to 100x10⁶ cJ/kg (up to 80 Mrad)

Cable structure
 - Bare copper-conductor, to
   DIN VDE 0295 cl.5, fine-wire,
   BS 6360 cl.5, IEC 60228 cl.5
 - Core insulation of special
    PVC compound type TI2 to
   DIN VDE 0207-363-3 / 
   DIN EN 50363-3
 - Core identification to 
   DIN VDE 0293  black cores 
   with continuous white
   numbering
 - GN-YE conductor, 3 cores
    and above in the outer layer
 -  Cores stranded in layers with
    optimal lay-lenght
 -  Outer sheath of special
    full-polyurethane
     compound type TMPU to
     DIN EN 50363-10-2
 -  Sheath colour grey 
    (RAL 7001)
 -  with meter merking

Properties
 -  Resistant to
    UV-Radiation, Oxygene, Ozone and
    Hydrolysis, Microbes
 -  Low adhesion, matt surface
 -  The materials used in manufacture
    are cadmium-free and contain no
    silicone and free from substances
    harmful to the wetting properties
    of lacquers


Note
 -  G = with green-yellow conductor
     x = without green-yellow conductor (OZ)
 -  AWG sizes are approximate equivalent
    values. The actual cross-section is in
     mm²
 -  screened analogue type : 
   JZ-500-FC-PUR, confer page 76

No.cores x
cross-sec.
mm2

Outer ᴓ
approx.
mm